ads

How to Troubleshoot Linksys Wireless Router?

Linksys Wireless Routers are known for their ease of use and provide flawless network connectivity around your home. Despite being one of the leading home-network device brands, there may be several times when you face issues with your Linksys Wireless Routers and might be trying hard to figure out how to fix Linksys Wireless Router. These issues might include:

• Fluctuations in the wireless connectivity
• Slow downloads or uploads
• Inability to access the router’s web-based setup page

How to fix the Linksys Wireless Router?

1. Power cycling the device is one of the quickest ways to resolve most of the issues with the device. Disconnecting the power line from the router and plugging in after a minute might resolve the issue.
2. Identify if there are any issues with the physical connections and the equipment. Any damages to the cables would eventually impact the internet connectivity.
3. The link light for each hardware must be green, which indicates the proper functioning of the device.
4. The network cable connectivity must be at a distance from the power outlets, UPS, and any other source of substantial electromagnetic interference.
5. In case your router was purchased more than three years ago, try to switch off the router for approximately 10 minutes each day. This will help clear unwanted cache files and maintain the router health.
6. Check the compatibility of the Wired Equivalent Privacy (WEP) and Service Set Identifier (SSID) settings of the wireless router and other devices on the network.

One of the ways stated above will possibly resolve the connectivity issues you face with your Linksys Wireless Routers.

How to check the WEP and SSID settings?

To check the WEP and SSID settings, you can follow the procedure stated below:

• Type 192.168.1.1 in your browser’s address bar.
• You will be prompted to enter the log in credentials. Enter ‘admin’ in the password field and leave the username field blank.
• In case, you have made the changes in log in credentials while setting up the device earlier, enter the new username and password.
• You will be directed to the ‘Router Setup’ page.
• Verify the WEP and SSID settings. They must be similar to all other wireless devices on the network.

In none of the given tips to fix Linksys Wireless Routers comes to your rescue, try to restore the device to its default settings. To reset the router, press and hold the reset button on the front of the router until the red Diag light of the router is one. Now you can proceed with restarting your computer. The issue will be finally resolved.

Post a Comment

0 Comments